2011couper

Would anyone be interested in the plugs for the OEM horn so that Hella/Solecci Horns don't have to be spliced into the stock harness? I can buy the minimum amount (10 connectors) through work. They are $6.99 a piece, and there is a 6-8 week lead time.

I would prefer to use a plug, so I don't have to strip back the stock wires, and risk ruining them.

Again, I have to buy at least 10. I would want two, and another member on here wants two, so there would be at least 6 connectors available. I can order any number over 10, so 12, 14, 18, etc.

Would anyone be interested? It'd have to sell to at least three members before I could proceed.

I'm sorry that this is in the wrong thread, I can't post in the classified thread, but I thought this would help out many people.

Paypal: kelly.jones@salve.edu

Jpc647

As I told you, I want two. If we can get two other people, I'll split the extra with you so we can get them.

So if we each buy 3 connectors, and we can find 2 others to buy them, at least it sort of offsets the cost for you(which I bet is what you're trying to do).

RedBullPL

Ill take 2,

1. 2011 Couper
2. Jpc647
3. Redbullpl

__________________
Owner- TriStateTints.com Serving NJ/CT/PA/NY
Location Mahwa, NJ And "We Come To You Service"

Current Car Black 2.0T Track
Past Cars 05 S55 AMG
06 Ram 1500 Hemi
00 B5 S4

LandoAWD

I'd be interested in PnP Supertones.

__________________
2012 Genesis 2.0T Nord Gray A/T
Ark Grip v.2, NGM Defender Intake, and some visual mods

2011couper

So do you want 2 of the connectors? They are $6.99 each. And I'll have to ship them. So if we can add $4 to cover the shipping(in an envelope) we're looking at $18. You down? I should have a final schematic of the piece (just for final reassurance) tomorrow. You in? Again, this is just for the two connectors to allow the supertones to be plug and play. This would not include the actual horns. You down?

One more person please?

Flipp

sub'ed for more info, pics and the install review. been thinking about getting the hella horns to get these terrible driver to wake up and move in my area. you have a part number for these connectors? serial number? something?

__________________

TurboXS/AGP/TWM/Zenclosures/Rockford Fosgate/Diode Dynamics/PA

LandoAWD

I understand the concept. I'm down, and we can call it 20 even.

__________________
2012 Genesis 2.0T Nord Gray A/T
Ark Grip v.2, NGM Defender Intake, and some visual mods

R-SpecdCoupe

very likely "in" here too, if there are more available. Does it take 2 to tango?

will you have a PayPal addy to send funds?

SubtleStyle

are you going to be selling them after this GB thing?

__________________

IY 3.8 Track

thestig

I'm down. Count me in for two. Where do I send the money? lol

2011couper

Yea, that might be easier. I'm not sure if I'll be doing paypal or not. I don't have an account. $20 would be fine. Doesn't paypal charge fee's?



I can order any multiple over 10. I don't have paypal at the moment, maybe I should get one. It would take two. There are two stock horns, and two supertones to replace them. The stock connects on the horns are not removable.

I wasn't planning on it. There is a pretty long lead time(like 8-10 weeks) for the part. I might order a couple more than I get paid for, just in case. It depends.

I think I'm going to get a paypal account. Is there any other way? I'll have to look into how to then transfer that money back to my bank account.

Would you guys have a problem sending the money as a "gift"? I'm not sure how much Paypal would take, but if I can save everyone(an myself) a couple of bucks, I would like to.

LandoAWD

Paypal charges 3%. I'd rather pay 20 (covers the 3%+) and have the slight peace of mind that comes with it.

TECHNICALLY, asking for the 3% is against the terms of service, so most build it into the price. I'd be OK with gifting if there was some sort of seller rating on this forum, but there isn't.

In any case, I'll work with you to have a clean option for installing Supertones.

__________________
2012 Genesis 2.0T Nord Gray A/T
Ark Grip v.2, NGM Defender Intake, and some visual mods

Red Raspberry

Gifting gives no recourse. And you have to provide your name and address for the shipper.

__________________
2010 Red 2.0L track

R-SpecdCoupe

Get a PP account. just need a valid email address. No cost to join.

the 3% fee is reasonable. just set the price @ $20.00 shipped in U.S.

using PayPal gives both parties greater assurances, and some (iffy) recourse if you're a SCAMMER!

thestig

Any new updates on this?

RedBullPL

You can use my PP account and Ill just send you the cash if you want.

__________________
Owner- TriStateTints.com Serving NJ/CT/PA/NY
Location Mahwa, NJ And "We Come To You Service"

Current Car Black 2.0T Track
Past Cars 05 S55 AMG
06 Ram 1500 Hemi
00 B5 S4

2011couper

Turns out my girlfriend Kelly has a paypal account. So I'll probably just end up using that.



I think I will be setting the price at $20 shipped.


I apologize for the delay, things at school are pretty busy. I don't get on here too often. I ordered a single "sample" of the part which I should have on Friday. Then I can play around with it and start taking orders for it.

The only "hard part" is going to be attaching the new wires to the connector. There is a recession where they have to connect. I'll get a picture of what I mean. Bending one of those crimp "eye" connectors at a 90 might work. I'll have to look at it. Either way, it'll be better than stripping the stock wiring harness back and slicing in. At least I'll get to play with it to figure something out without taking the car apart.

Red Raspberry

Anything come of this?

I'm relocating my horns and a male spade .110" crimp connector will fit in the OEM plug perfectly. I'm making some extensions to move the horns out to the sides.

__________________
2010 Red 2.0L track

2011couper

I actually have two of the plugs I ordered. I took pictures the other day and thought I posted here, guess not.

It appears you cut the stock connector off the wires, my goal was to find a way not to do that. I know a spade connector would probably work, but to get two of them in there would be the challenge.

I'll get picture of them, and can now collect money(as I've confirmed they are exactly like the OEM ones).

So Far it's
1)LandoAWD
2)thestig
3)Rspecdcoupe
4)Jpc647
5)RedBullPL
and obviously me.

Right?

Red Raspberry

No I'm just holding it my hand, I did not cut it off.

__________________
2010 Red 2.0L track