chris_2.0_rspec

Raj, jermaine, whomever.
I have made multiple attempts to get the correct spring for my txs Bov, pm and email get a response but its always a " will be in soon and I will send out" its been month since I have been updated on this and I'm frankly get pretty tired of getting told " I will ship it to u when they come in". I need this asap. I need to know what's going on.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

chris_2.0_rspec

Not trying to get too irrate here editted my original because I have been getting responses and all just needing this spring.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

chris_2.0_rspec

??? Bump for response.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

Do you have the RFL?

__________________

chris_2.0_rspec

I believe so. It's a type h, I think rfl. The big bell atmospheric Bov.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

Take the spring out. Cut 2 full coils off of one side, put the spring back in.

__________________

chris_2.0_rspec

See here is the problem, already diacussed with raj, i cut it back and its not holding booat I shimmed it amd its crap. Just need the correct spring... I get 12 psi a leak from Bov a spike of 15 drop to 10 qnd shaking boost around 10 psi.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

are you hooked up to the factory solenoid? or manifold pressure?

__________________

chris_2.0_rspec

Mainfold green and white check valve.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

try the black and white check valve instead.

__________________

chris_2.0_rspec

Is there that much of a difference and the hose seems a bit to big to run to the Bov. Yes?

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

There is a difference yes. What size line are you running? Im using 1/4 inch and it works perfect.

__________________

chris_2.0_rspec

Not sure on size think 1/8 but Idk its small fits right on the Bov nipple and on everything I use it for.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

chris_2.0_rspec

Thanks for the help. I'll give it a try and hope it help

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

anytime.

__________________

Jermaine@TXS

Chris 2.0 Spec: I sent you a PM. I am terribly sorry for getting back to you so late.

__________________

Check US Facebook|www.TurboXS.com|Email/Paypal:Sales@TurboXS.com|Technical Questions:GenesisTech@TurboXS.com

chris_2.0_rspec

All is well bro. I appreciate all the help and the fast response.
Looking forward to future business with you guys! Parts list already made.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED

SteveJohns29!

Did my suggestions fix it?

__________________

chris_2.0_rspec

Haven't been able to test that my hose will not fit on both. I have some that firing check valve aide but not bov and vise versa, all my t,s are same size.. I just ran it back to selenoid and notice some rough shitt. A set of sensors on hot side attached to a bracket have been popped loose and dropped onto the turbo lots of melted crap. Not sure what these even are or if they are causing a problem. Had to of been like this for a while now. Car hasn't been moved in a few days.

__________________
"...and you're worried about 2 fingers worth of force applied to your shift forks? What do you think they're made out of? popsicle sticks held together by chewing gum? I finger my girlfriend harder than that, and she hasn't broken yet..."- BKED