Intake Manifold Porting - 3.8 V6 - Genesis Forum: GenCoupe Hyundai Genesis Forums
Reply
 
LinkBack Thread Tools
#1 Old 10-04-2011, 01:35 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)
Intake Manifold Porting - 3.8 V6

Give your Genesis Quicker Throttle Response and a Cooler Intake Charge? Of course it does!!

After plenty of time on the flow bench, Grimmspeed is proud to bring you a balanced intake manifold. We have worked over the 3.8L V6 upper and lower intake manifolds thus reducing the variance between runners. The OEM variance is roughly 10.8% and our balanced manifolds have been taken down to a minimal 2.1% variance across the board. The runners on the driver's side of the V6 are well balanced in OEM form, and that how we leave them. The runners on the passenger side of the V6 are slow in comparison. Our porters with their skilled hands and knowledge increase the flow to meet that of the other bank of the V6. After the porting is complete, all runners are left with a media blasted finish to preserve surface uniformity across all runners. The end result is a well balanced intake manifold, allowing for more aggressive tuning and a smoother running V6.

Price: $349.99 + Shipping









***Ceramic Coating is available at an additional charge of $99.99 in either black (shown) or blue coating***

Please PM me if you are interested in buying this or for more information.

Thanks,
Brandon
BrandonGS is offline  
Sponsored Links
Advertisement
 
#2 Old 11-22-2012, 09:16 AM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

PM me to ask about Thanksgiving/ Black Friday specials! Today and tomorrow only!
BrandonGS is offline  
#3 Old 11-22-2012, 12:15 PM
Senior Member
 
Join Date: Oct 2011
Location: Darmstadt, Germany
Posts: 355
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)

pm with black friday special pls 64665, germany
solu is offline  
#4 Old 11-22-2012, 01:59 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by solu View Post
pm with black friday special pls 64665, germany
Could you please PM me with your full address? I will need it to get a more accurate shipping quote.

Thanks-
BrandonGS is offline  
#5 Old 11-28-2012, 05:48 AM
Obsessed
 
Join Date: Nov 2012
Location: Houston, TX
Posts: 625
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Ported intake for the 2013 3.8

Brandon,

The porting looks great. Can you please give me a quote for a 2013 3.8? My address is Houston, TX 77047. I tried to PM, but it says I don't have enough posts to PM, or something odd. Thanks, and keep up the great work!

Regards,

Jeff
JGowen is offline  
#6 Old 11-28-2012, 12:30 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by JGowen View Post
Brandon,

The porting looks great. Can you please give me a quote for a 2013 3.8? My address is Houston, TX 77047. I tried to PM, but it says I don't have enough posts to PM, or something odd. Thanks, and keep up the great work!

Regards,

Jeff
Yup you need ten posts to PM on this site.

Let me check with my sales manager, I don't think I'm able to give a price for the 2013MY just yet. We're working on something, but just let me check and I'll get back to you soon.
BrandonGS is offline  
#7 Old 11-28-2012, 12:41 PM
2012 3.8 Track ZF-6-SPD
 
Metal's Avatar
 
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 2,920
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Garage

I would love to do this and a spacer but hate to risk warranty.

Engine
- UR Light Weight Pulleys
- R2C SRI/P2R Spacer+Gaskets
- GS Spacer/PnP+CC TB-ST-IM
- ARK R-Spec+CC Headers/DP/TP
- System Upgrade Single Exit CBE
- SFR Stage 1.5 Custom Tune
Exterior
- Boostec CF Front Lip
- M&S Side Splitters
- ViS CF Rear Diffuser
- ARK C-FX CF Grill
- ViS CF Fog Bezels
- 2013 Tinted OEM Tails
Chassis
- VOLK TE37SL/Hankook
- R1/StopTech/SS Lines/Dot 4
- PSM Pro Coilovers
- Luxon Strut Bar
- UR 4pt Rear Strut Brace
- SFR Rigid Collar Kit
Metal is offline  
#8 Old 12-05-2012, 08:49 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by Metal View Post
I would love to do this and a spacer but hate to risk warranty.
I think there's less chance of this killing the warranty then an intake. Unless you get the ceramic coating the porting isn't visible on the outside.

Just FYI for everyone: Pricing for the 2013MY 3.8 is the same as for the other model years. Which means yes, we are able to do this even though it's direct injected (spacer fits the 2013MY as well).

Still waiting on Dnyo results for the 2013MY.
BrandonGS is offline  
#9 Old 12-06-2012, 04:14 PM
2012 3.8 Track ZF-6-SPD
 
Metal's Avatar
 
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 2,920
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Garage

If i do the pnp ill also do the paint. Also a spacer when Im reisnatlling the I M.

Engine
- UR Light Weight Pulleys
- R2C SRI/P2R Spacer+Gaskets
- GS Spacer/PnP+CC TB-ST-IM
- ARK R-Spec+CC Headers/DP/TP
- System Upgrade Single Exit CBE
- SFR Stage 1.5 Custom Tune
Exterior
- Boostec CF Front Lip
- M&S Side Splitters
- ViS CF Rear Diffuser
- ARK C-FX CF Grill
- ViS CF Fog Bezels
- 2013 Tinted OEM Tails
Chassis
- VOLK TE37SL/Hankook
- R1/StopTech/SS Lines/Dot 4
- PSM Pro Coilovers
- Luxon Strut Bar
- UR 4pt Rear Strut Brace
- SFR Rigid Collar Kit
Metal is offline  
#10 Old 03-07-2013, 04:07 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Had a bunch of inquire about this, so making a post:

Current porting lead-time is two weeks.

We do not currently have a core available for use. If you are interested in using the core with this, please add yourself to this thread: http://www.GenCoupe.com/grimmspeed/1...8-im-core.html and whenever one becomes available I'll make a post there.

We are also looking to buy another 3.8 IM or TB core, so if anyone has one available please send me a message here or an email at BethesdaPerformance@gmail.com.
BrandonGS is offline  
#11 Old 03-07-2013, 04:13 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by BrandonGS View Post
I think there's less chance of this killing the warranty then an intake. Unless you get the ceramic coating the porting isn't visible on the outside.

Just FYI for everyone: Pricing for the 2013MY 3.8 is the same as for the other model years. Which means yes, we are able to do this even though it's direct injected.

Still waiting on Dnyo results for the 2013MY.
So this is done:



From: http://www.gencoupe.com/general-disc...eps-stock.html
BrandonGS is offline  
#12 Old 03-07-2013, 04:23 PM
GCMafia
 
azgencoup's Avatar
 
Join Date: Apr 2010
Location: SoCal/AZ
Posts: 3,443
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Garage
Intake Manifold Porting - 3.8 V6

Hey u guys do the throttle body on the pre 13s also?


Sent from AutoGuide.com App

PERFORMANCE
ARK - Tomei Ti - P2R - Grimmspeed - NST - TWM - TiC - AEM - BC RACING - QUAIFE - WHITELINE - CP-E - MEGAN RACING - MISHIMOTO - KHAR
LOOKS
Flossy - ARK - Sequence - Fly Ride - FIVE:AD S5:F - Enkei RPF1
19x9.5+25f-245/35 19x10.5+22r-275/35
18x9.5 +15 265/35 All Around

NSFW!
azgencoup is offline  
#13 Old 03-07-2013, 04:35 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by azgencoup View Post
Hey u guys do the throttle body on the pre 13s also?


Sent from AutoGuide.com App
Yes we do, MSRP is $89.99 and $49.99 for the coating.
BrandonGS is offline  
#14 Old 03-07-2013, 04:40 PM
GCMafia
 
azgencoup's Avatar
 
Join Date: Apr 2010
Location: SoCal/AZ
Posts: 3,443
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Garage
Intake Manifold Porting - 3.8 V6

What all do u guys do to it? Seems like it's already pretty flush with everything, and smooth! I can see the coating been helpful.... Mind telling


Sent from AutoGuide.com App

PERFORMANCE
ARK - Tomei Ti - P2R - Grimmspeed - NST - TWM - TiC - AEM - BC RACING - QUAIFE - WHITELINE - CP-E - MEGAN RACING - MISHIMOTO - KHAR
LOOKS
Flossy - ARK - Sequence - Fly Ride - FIVE:AD S5:F - Enkei RPF1
19x9.5+25f-245/35 19x10.5+22r-275/35
18x9.5 +15 265/35 All Around

NSFW!
azgencoup is offline  
#15 Old 03-08-2013, 12:22 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by azgencoup View Post
What all do u guys do to it? Seems like it's already pretty flush with everything, and smooth! I can see the coating been helpful.... Mind telling


Sent from AutoGuide.com App
The Hyundai TB's are decent from the factory. On the TB we knife edge the inlet and remove a small step near the valve. I wouldn't put a priority on this service but if the rest of your intake system is taken care of this could be the cherry on top.
BrandonGS is offline  
#16 Old 03-08-2013, 12:34 PM
Obsessed
 
Join Date: Nov 2012
Location: Houston, TX
Posts: 625
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)

Brandon,

I get home April 3rd, so the next day I plan to pull my manifolds and TB off and ship to you for the full service, coated blue. I know it's been a while since we talked about it, I had some things going on that kept me from being able to take the car out of service, but it's time! I'm pumped. I saw how ByzKing's came out, it looks amazing. Just thought I'd give you a heads-up, I know you said the turn around time is running about 2 weeks. I think the PM I had from you before was the quote for just the P/P and ceramic coat, without the TB work. Can you shoot me a PM with the TB work included, please? And I'll keep my fingers crossed for the phenolic spacers to be ready for the '13 by then. Thanks, man!!

2013 GC 3.8 GT, Monaco White
Installed Injen SRI, Ark GRIP V2, System Upgrade pulleys, RPF1 18"s, GS spacer and P/P/coated IMs and TB, BTRcc custom tune, SM catch cans, VIS cf trunk, Whiteline F/R sway bars, CX Racing V2 coilovers, Uniq Underbrace kit, Gemini AR cf hood, Quaife LSD, Mishimoto oil cooler, Wilwood BBK
Received Boostec H2 cf fenders, Ixion cf spoiler, ZEX 125 Shot Nitrous, Megan engine mounts
For Sale factory exhaust, suspension, sway bars, trunk, and hood
JGowen is offline  
#17 Old 03-08-2013, 12:45 PM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by JGowen View Post
Brandon,

I get home April 3rd, so the next day I plan to pull my manifolds and TB off and ship to you for the full service, coated blue. I know it's been a while since we talked about it, I had some things going on that kept me from being able to take the car out of service, but it's time! I'm pumped. I saw how ByzKing's came out, it looks amazing. Just thought I'd give you a heads-up, I know you said the turn around time is running about 2 weeks. I think the PM I had from you before was the quote for just the P/P and ceramic coat, without the TB work. Can you shoot me a PM with the TB work included, please? And I'll keep my fingers crossed for the phenolic spacers to be ready for the '13 by then. Thanks, man!!
Sure, will send you a PM right now.
BrandonGS is offline  
#18 Old 04-12-2013, 12:31 AM
Obsessed
 
Join Date: Nov 2012
Location: Houston, TX
Posts: 625
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Delays

Brandon,

There will be a delay in sending my intake to you. I have to take the car to the dealer Monday to have the TCM update performed, due to it slipping horribly. Since this means I couldn't get it apart, send it off to you and get it back in time to go back to work anyway, I'll wait until right before I leave for work to send it to you. This way it will be done and back home just in time for me to come home from work and put it back together in time for the tuning event in Austin. I'm really upset that I won't get to have it done this time off, I was so excited to see the final product and feel the difference. Anyway, just wanted to give you a heads up.

2013 GC 3.8 GT, Monaco White
Installed Injen SRI, Ark GRIP V2, System Upgrade pulleys, RPF1 18"s, GS spacer and P/P/coated IMs and TB, BTRcc custom tune, SM catch cans, VIS cf trunk, Whiteline F/R sway bars, CX Racing V2 coilovers, Uniq Underbrace kit, Gemini AR cf hood, Quaife LSD, Mishimoto oil cooler, Wilwood BBK
Received Boostec H2 cf fenders, Ixion cf spoiler, ZEX 125 Shot Nitrous, Megan engine mounts
For Sale factory exhaust, suspension, sway bars, trunk, and hood
JGowen is offline  
#19 Old 04-12-2013, 12:45 AM
Senior Member
 
Terrance32's Avatar
 
Join Date: Oct 2011
Location: Killeen, TX
Posts: 3,182
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)

Any in stock?

First production 3.8 turbokit in the US.
517whp/470wtq
[SIGPIC][/SIGPIC]
Terrance32 is offline  
#20 Old 04-12-2013, 08:09 AM
Senior Member
 
Join Date: Mar 2010
Location: Live in NJ, Work in MN.
Posts: 9,859
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
(Thread Starter)

Quote:
Originally Posted by JGowen View Post
Brandon,

There will be a delay in sending my intake to you. I have to take the car to the dealer Monday to have the TCM update performed, due to it slipping horribly. Since this means I couldn't get it apart, send it off to you and get it back in time to go back to work anyway, I'll wait until right before I leave for work to send it to you. This way it will be done and back home just in time for me to come home from work and put it back together in time for the tuning event in Austin. I'm really upset that I won't get to have it done this time off, I was so excited to see the final product and feel the difference. Anyway, just wanted to give you a heads up.
It's ok, no worries.

Quote:
Originally Posted by Terrance32 View Post
Any in stock?
Zero cores in stock for either engine sadly.
BrandonGS is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Genesis Forum: GenCoupe Hyundai Genesis Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Intake Manifold burks95 2.0T Discussion 2008-2012 36 01-02-2011 08:02 AM
GrimmSpeed Manifold Porting Kahij 3.8 V6 Discussion 2008-2012 3 06-29-2010 08:30 AM
Intake Manifold Porting BAMATuner 2.0T Discussion 2008-2012 20 09-23-2009 08:08 PM

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome