Here's how the two tiers work if it isn't straight forward enough already. Basically if you just want one or two of the options in Tier one, you just add them up, and that's what you pay for the work. If you need us to do the work on our lights here, and ship them off to you, you'll pay us for the job, then we'll ship the lights out when ready (3-5 days), and provide you with a tracking number for them via UPS. If we're doing a coreswap, you'll receive the lights, install them on your car, and send us your stocks back, and you'll receive 150 dollars back once we get the lights returned to us.
If you're local, that's great because you wont have to pay to ship them back to us. If you're not local, you'll need to put the stock lights back inside the box, and ship them back to us. We'll provide the shipping label back, so you'll just tape up the box, and slap the shipping label sticker right on the box and hand it off to any UPS person. We'll provide the label, but that shipping money will be taken out of the 150 dollar rebate to you once we get the lights back. The reason we'll use UPS is so that the lights are properly insured and trackable on their way to and from your location.
Here's a Tier One build: Total Cost $440
Clear Corner Reflectors - 115
CCFL Angel Eyes - 50
Black Bezel - 50
Flat Rate - 150
Install on Car - 75
GCtuner sticker - FO FREE SUCKA!
Here's a Tier Two Build: Total Cost $810
Removed Amber Signal Reflector - Free
Retrofit Projectors - 150
H11 HID kit - 80
H1 HID kit - 80
Flat Retrofit Rate - 500
Here's the Same Build with RGB Angel Eye option: Total Cost $1010
Here's a Tier Two build: Total Cost $1685
Flat Black Painted Bezels with OEM projector shroud completely removed - 75
Quad H1 Mini Projectors with Adapter Plates (low beam side only) - 350
H1 HID kit x2 - 160
Projector shrouds paint matched to the customers paint code: Hyundai NDA 1 Stage Paint - 100
Dual Color LED Angel Eyes (Amber / Red) - 180
Hi beam wires rerouted to Bi-Xenon Projectors (included in retrofit rate)
Amber Angel Eyes wired in to flash with corner bulbs - 20
Flat Rate Retrofit - 500
Install onto vehicle with switch mounted inside the car 4 hours- 300
For that install we took extra long due to taking shots of the car, video, etc. constantly through out. The main problem was mounting 4 ballasts and routing the wire as clean as possible. A typical Car install should only take 2 hours, which would put it at 150.