Hyundai Genesis Forum - Conversation Between shorttrack and Jacky Esquenazi
Conversation Between shorttrack and Jacky Esquenazi
Showing Visitor Messages 1 to 9 of 9
  1. shorttrack
    06-14-2016 - permalink
    shorttrack
    Not using the little wide open throttle switch that came with the proton NX kit ,My activation method is done by my NX Maximizer 4 controller .The controller is wired to the throttle body TPS (throttle position sensor) wire .
  2. Jacky Esquenazi
    06-13-2016 - permalink
    Jacky Esquenazi
    Im referring to the WOT Switch that comes with the kit, not the window switch/rpm switch, the switch that is activated at only wide open throttle, how did you connect/ set this up, sorry for the confusion i miss asked the question.
  3. shorttrack
    06-10-2016 - permalink
    shorttrack
    The GMR I hook up to the NX maximizer 4 N2O controller .The NX controller has the window switch function .The I hooked the throttle position sensor also to the Max $ N2O controller as well .
  4. Jacky Esquenazi
    06-10-2016 - permalink
    Jacky Esquenazi
    did you also hook up your wide open throttle switch to thus gmr or just ur window switch
  5. shorttrack
    05-29-2016 - permalink
    shorttrack
    I used the MSD digital shift light p/n 89631.It comes with what is called a GMR (magnetic pick up) that clips to the red wire of the driver side spark plug coil wire of the second (middle coil) coil .I used this wire as it has the longest wire when the protective cover is removed .Make sure you tape it back up once you are done and zip tie the GMR in place so it does not move around and fray the wire going through it during driving .If you do not want the shift light then the GMR can be purchase separately .I got mine from summit racing .com You splice the Maximizer 4 controller or window switch RPM signal wire to the GMR rpm signal switch and your done .Loop the red wire through the clip twice for better signal pick up .make sure you read the instructions .it is pretty straight forward .If you need help,PM me .
  6. Jacky Esquenazi
    05-29-2016 - permalink
    Jacky Esquenazi
    Hey man last question i promise, how to did you hook up your window switch(wot)
  7. shorttrack
    05-23-2016 - permalink
    shorttrack
    If you go to the -Nitrous on a GDI thread-on page 5 ,post #82 member dprince gives fuel line adaptor part #,# NX fuel line adaptor 10190 for a 5/15 or 8mm fuel line .Also on page 5 dprince posted a pick of the billet NX fuel line adaptor installed on his 3.8 2nd gen Gen coupe .
  8. shorttrack
    05-23-2016 - permalink
    shorttrack
    go to the- Nitrous on a GDI 3.8 thread - page 5 .
  9. Jacky Esquenazi
    05-23-2016 - permalink
    Jacky Esquenazi
    Hey is there anyway you can send me pics of where you tapped into your fuel line, i know your super busy with people asking for pics but if you could please help me out, would be much appreciated. if its more convenient for you, you can send it to my phone number: 3053333838
 
For the best viewing experience please update your browser to Google Chrome