So, I didn't see this info collected anywhere else on the forums and I thought I'd share. I have measured all of the crush washers for the engine oil, M/T, and differential housing. Here is the info:
I have included reference part numbers from the Dorman catalog available online, as well as McMaster-Carr (http://www.mcmaster.com
) part numbers. These are not verified and not guaranteed to work, but they should. All of the ID's for the alternate part numbers are pretty close to the OEM values, but in some cases the OD's are different by a couple mm.
Note that this is all for a 2012 2.0T, except for the M/T drain plug, which is the upgraded 2013+ version with the larger magnet that I found out about on other areas of the forum.
Also, the touch up paint part is apparently an upgraded version. The touch-up paint I received has both the color coat as well as clear coat, and the applicator has both a pen type applicator as well as the typical nail polish type brush.