Hyundai Genesis Forum - View Profile: 1animalstyle

1animalstyle 1animalstyle is offline

Junior Member

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. superchode
    03-09-2018 - permalink
    Cool Ya I bought mine "COMPS" (Parts Shop Max / PBMS) direct from them. They are in San Diego if ya haven't already figured it all out. But I love them. Super easy to dial in ride height and dampening. They actually have a built in slot in the fronts for up to like 2 degrees camber adjust. the rears you can use factory adjustment, so you dont actually need the R-spec front camber bolts (but you could for alittle more adjustment). As long as you aren't going any lower that where I am at you wont need to mess with the end links. BUT if you want to go lower or just do it right I would suggest adjustable end links at least for the front. I am actually getting some now, dont need them, but I dropped another like 1/8" and now I think they are screaming to come off lolz..... To do it proper you should get front end links for sure, BUT youodnt need them if you arent going SLAMMED...... The guys at MAX can give you the info on all that.... Have fun
  2. superchode
    02-10-2018 - permalink
    correction.... I would say its actually more like 2.5-3" drop, like 2.75" all around....
  3. superchode
    02-10-2018 - permalink
    If I were to take a guess with my PBM coils I am about 3.25" dropped total. Basically I set it so looking from the side of the car, the TOPS of the tire tread (brand new OEM size tires) sit exactly at the same height of the wheel wells (the sheetmetal). I had the measurements when I first dropped it (before and after) but spilled a drink on the paper they were on lolz..... But I think its a great balance of looks, performance and drivability all around. I think with these cars you want to avoid going too low or "tucking the wheels" becasue the dynamics of the McPhearson suspension setup we have. Also the most important thing is getting and alignment straight away (new tires or lowering the car).... I have everything set just slightly more negative that OEM max rnage (like no more than .2 degrees outside OEM spec). It handles like its on rails and the PBMS have that easy to dial in dampening so I can run like a caddy or like a IMSA car LOL. Hope that helps alittle....
  4. superchode
    02-10-2018 - permalink
    Well I cant remember exactly how far its dropped. But for me in Socal its the absolute perfect drop. Dont bottom out on driveways or speedbumps (although I do need to take slight angles but nothing terrible). I do have trouble sometimes on steep/tight driveways because of the factory Torsen LSD rear end, if one of the wheels gets in the air lolz. But simply holding the handbrake and giving a little throttle gets it going again....

  About Me

  • About 1animalstyle
    Montclair, CA
    Cars, technology, futbol (soccer)
    Technology Specialist


Total Posts
Visitor Messages
General Information
  • Last Activity: 05-03-2019
  • Join Date: 05-07-2015


Showing Friends 1 to 3 of 3


No results to display...

  Thread Tags

No results to display...


03:27 PM - tt0ne quoted 1animalstyle in post Exedy Clutch Kit
First off, not a problem. I'm gla...
10:08 PM - 1animalstyle quoted bsbullie in post Has anyone found best crackles/pops system?
A box of rice krispies and mi...
04:34 PM - Philly_KDM quoted 1animalstyle in post Fuel Mileage in one tank of gas
Ah, i havent done that in a while...
03:54 PM - Philly_KDM quoted 1animalstyle in post Fuel Mileage in one tank of gas
Automatic, i suppose that's why t...


    2013 Hyundai Genesis
    2013 Hyundai Genesis
For the best viewing experience please update your browser to Google Chrome