Hyundai Genesis Forum banner

Search results

1-20 of 493 Results
Advanced Search
  1. Oil Temp PID for OBDII scanners

    2.0T Discussion 2008-2012
    not sure at all trans as a temp sensor, bit i could be mistaken
  2. 2013 haltech AC fix DIY

    2.0T Discussion 2013 and up
    something is suspicious my picture are not working anymore seem's photobucket doens't permit to paste picture as image anymore just link....unless you pay 400$ a year for now the easy way is to use open image in a new tab ...let you view it and for some reason if i open some in my account...
  3. Haltech on 2014 Gen

    2.0T Discussion 2013 and up
    from what i remember skids was just putting a on off switch to power up the compressor i built some unit to make it seemless http://www.gencoupe.com/2-0t-discussion-2013-up/444122-2013-haltech-ac-fix-diy.html if you want one just send me a e-mail at [email protected]
  4. 2013 haltech AC fix DIY

    2.0T Discussion 2013 and up
    you were hiding in the junk mail ...
  5. 2013 haltech AC fix DIY

    2.0T Discussion 2013 and up
    just use my e-mail [email protected] for the install here is the instructions https://www.dropbox.com/s/6rausw30vlhuj7z/TheCoolModule.pdf?dl=0
  6. 2013 haltech AC fix DIY

    2.0T Discussion 2013 and up
    i sell some unit from time to time for 250 US shipped .. for the haltech platinum ... never tried the new elite if you want to keep the stock turbo you need to get rid of the e-wg and build a custom bracket and install a standard vaccum WG .. i have seen it once But if some one...
  7. Ask a Geek ~~><No Troll Zone><~~

    New Member Section
    it's not that bad i had a small offset when i began i didn't had the custom PID and i was measuring the map voltage and was introducing the value in the can bus and the value was not that far off .. of the pid value here was the result with arduino one was is the boost from torque the other...
  8. Ask a Geek ~~><No Troll Zone><~~

    New Member Section
    it depend on witch PID the one a have give me absolute pressure... so it's 14.7 psi engine off in torque i subtratct barometrique valo (33) to give a zero value and you have to be carefull PID outpout is not always related to the real sensor output in standard PID the max boost you...
  9. torque app 0-60 accuracy?

    General Discussion
    That pic look EXACTLY like mine ..something is supicious lol since i did all the coloring my self for better view or the thumbnail is ****ed up
  10. torque app 0-60 accuracy?

    General Discussion
    I have a can bus analyser ... cananalyst II i bought it on ebay .. it't kinda cheap but does work really well...once you find the way to install the software ...
  11. Oil Temp PID for OBDII scanners

    2.0T Discussion 2008-2012
    is suspect that formula is ****ed up try -40 instead of -4001 since if i look at the value they seem to get out in C and you transfert them in F standard temp sensor formula is A-40 to get celsius https://en.wikipedia.org/wiki/OBD-II_PIDs i have tested obdlink mx and mx wifi and...
  12. 2013 hks bov stock location need help please

    2.0T Discussion 2013 and up
    no need to cap anything on the solenoid...it's just plastic inside with plunger
  13. Ask a Geek ~~><No Troll Zone><~~

    New Member Section
    the knock detected doesn't seem to work even with my hyundai GDS knock detected says 0 but i can see knock here and there ... I haven't went all the way to confirm if they were false knock...but they seem to be modifying the final timing .... on the dyno the tuner said that he could feel...
  14. Ask a Geek ~~><No Troll Zone><~~

    New Member Section
    KR never add's timing ...if something show up in there then you have knock... don't be fooled by the sign here if you want boost all the way to the limit of the sensor it's missing the end of the formula should be *0.14503) here took another pic from my tablet instead
  15. Ask a Geek ~~><No Troll Zone><~~

    New Member Section
    did you check you injector duty cycle if you still have the oem i had a gt3071 and at 22 psi i was near 100% of injector duty and it would lean out 22 psi was good on a hot day but i would need to lower the boost by a couple of psi on cool night to prevent the issue on cool night you can...
  16. Is it possible my gas pedal is bad? Or do I need spark plugs? Automatic transmission

    2.0T Discussion 2013 and up
    you are way to scared my friend ... these days the car protect them self alots... don't try it....i have seen a guys put it in reverse on a new focus at highway speed.... the only thing it did is turn on the backup camera...so switching tranny mode is no issue compared to that but i would...
  17. Xclusive Tuning

    Engine
    from what i have seen they are affiliated with a big europeen company or something zip tuning it was they switched there brand name to Xclusive tuning not to long ago and also talked to the guys ... easy to talk to
  18. Screw Lap 3, check this out...

    Engine
    Nolman (alphaspeed) as released some tuning table for the bk2 a long time ago in win ols but it's a bit tricky ... even with those when my haltech broke i retried the stock pcm ... I already had a sfr custom tune to start..so was good base.. but i had some overheat protection kicking in ...
  19. Where do I start for tuning?

    DIY - Do it Yourself
    yeah obdII to bluetooth with the torque app is way usefull moding timing and afr is not really hard WHEN you have the proper software currently easy tuning software for gen are hard to find
  20. Traction Control off FOR GOOD?

    General Discussion
    there was somebody selling a cheap module over here to do the trick personaly i used a digistump with a relay ...but the option on this forum was cheaper if i remember here http://www.gencoupe.com/classified-drivetrain/505226-ecs-auto-off-device-programmable.html
1-20 of 493 Results
Top