Hyundai Genesis Forum banner

Search results

1-20 of 75 Results
Advanced Search
  1. Steering Wheel Core Confusion

    Interior 2013 and up
    Yeah unfortunately it's been over a year now since the order was placed. Not sure what to expect at this point. I have a feeling that I may not be alone in this situation of year long lead times from them...
  2. Loud rattle under 13 gen coupe 3.8 track

    3.8 V6 Discussion 2013 and up
    I have a 2013 r-spec and have this exact same noise as well. I just assumed it was the dual mass flywheel springing around since it only really seems to happen if there is torque/strain in the driveline and then quickly push in the clutch.
  3. Steering Wheel Core Confusion

    Interior 2013 and up
    Just bumping this again to see if anyone else has gotten a wheel since I last posted, was told a month ago that they had received 50+ wheels....apparently mine was not one of them....my girlfriend who bought it for me is starting to become very impatient lol
  4. Steering Wheel Core Confusion

    Interior 2013 and up
    Not to revive a dead thread but is anyone else waiting on a socal garageworks wheel order from around December? I just keep getting told manufacturing is backed up or by then end of each month for the past few months. Just want to make sure I'm not the only one.
  5. Steering Wheel Core Confusion

    Interior 2013 and up
    I wonder if that was before they had the different options for the R-spec/Ultimate wheels on the site. Greg said the wheel on the left is a typical r-spec/Ultimate wheel, while the one on the right is a regular gen coupe wheel. Yeah he had said about making me a new wheel with the other style...
  6. Steering Wheel Core Confusion

    Interior 2013 and up
    I'd imagine you would be fine as long as you selected the 2013+ R-Spec & Ultimate Option under the genesis coupe year drop-down on their website. I'd be almost willing to bet this is a 2013 model year issue since it always seems when companies do a facelift model that there is a bit of stuff...
  7. Steering Wheel Core Confusion

    Interior 2013 and up
    So I ordered a steering wheel from Socal Garageworks and since I have a 2013 R-spec I chose the 2013+ R-spec option. Well come to find out my old wheel, while although being in an R-spec, is not the typical R-spec wheel, it is actually the same layout as the regular 2013+ genesis coupe wheel...
  8. WTB: Steering wheel back plastic R-Spec

    Want to Buy
    So I ordered a custom steering wheel from SocalGarageworks and since I have a 2013 r-spec I chose the r-spec option. Well come to find out my old wheel, while although being in an r-spec, is not the typical r-spec wheel. All that means is my trim doesn't fit. You can see in the photo the...
  9. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    I did that already, that improvement is what lead me to do filled engine mounts. I was also thinking another leash from the passengers side as well to see how that helps Sent from my SM-G935U using Tapatalk
  10. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    I've thought about making supplemental mounts to try and limit motion especially left to right. I just haven't gotten around to drawing anything up to machine. Sent from my SM-G935U using Tapatalk
  11. DIY: 2013 3.8 OEM Poly Engine/Motor Mounts

    Engine and Drivetrain
    I was pretty surprised it had rusted like that. Nothing else in the engine bay has any rust on it. The only thing rusty is the oem exhaust fasteners. Sent from my SM-G935U using Tapatalk
  12. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    You probably could if you could get that rubber top piece off and used a polyurethane that wouldn't leak out the holes. Otherwise you would have to somehow get in there and tape them closed. Sent from my SM-G935U using Tapatalk
  13. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    Install is done and the DIY is updated, the mounts needed to come out the bottom as far as I saw. Power steering rack and subframe also needed to be loosened to allow for clearance to remove the mounts and install the new ones.
  14. DIY: 2013 3.8 OEM Poly Engine/Motor Mounts

    Engine and Drivetrain
    Ok so finally got them installed. Overall took about 5 hours with 2 people but to be fair I had recently hurt my back and was slow to get around under the car, plus I didn't really know how the mounts were supposed to be removed so we spent a decent amount of time figuring out what needed to be...
  15. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    It's not necessarily weird, just the power steering runs right under the openings for the nuts on the bottom of the mounts, kinda tight to access but maybe I can get in there with a crows foot or something. Worse case I have to unbolt the power steering rack a little. That shouldn't be too bad...
  16. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    Thanks guys, I already have the Megan transmission mount so these should work nicely with that. My main concerns now are 1. Do I have to undo the power steering rack? If not then what would you recommend using to undo the nuts and 2. Once I have the mounts undone do I pull them up through the...
  17. DIY: 2013 3.8 OEM Poly Engine/Motor Mounts

    Engine and Drivetrain
    I want to start off by first saying that I have not installed these yet but I am putting this up as a place-marker for myself so that I will actually make this DIY (and will update it accordingly as long as everything goes well) as well as the following disclaimer. Disclaimer: I'm not...
  18. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    Ok, so I got the mounts filled today, pretty straightforward. Does anyone have any experience in installing them on the car? Looks to me like I'll need to drop the steering rack at least a little to get the bottom bolts out and as far as the top bolts go I'm not sure what the best approach would...
  19. Swapping out for poly filled engine mounts

    3.8 V6 Discussion 2013 and up
    I'm planning on swapping my old oem engine mounts for new oem 60a poly filled mounts. Any tips or tricks I should know about filling or installing them? I've tried looking through the install threads but none of them show the 13+ 3.8. At least that I could find anyway. Sent from my SM-G935U...
  20. ISR suspension install need help

    Suspension 2013 and up
    As far as I know the only way to "delete" the rear spring is to go with the PSM coils. I think you should be able to install the rest of that kit aside from the rear LCA with the stock suspension. Sent from my SM-G935U using Tapatalk
1-20 of 75 Results
Top