Hyundai Genesis Forum banner

Search results

1-20 of 117 Results
Advanced Search
  1. 2013 DIY grill delete/cross member paint PICS!

    Exterior
    Crabtree! that looks legit. Def put a video up. I love the mod and finally someone has done it. I'm about to do the same my self. Just need a few supplies. Dremel etc... could you possibly list the tools you needed. And maybe some pictures of how you mounted the mesh on the back of the bumper...
  2. DIY: How to Seafoam the 3.8 V6

    Engine and Drivetrain
    So with doing this I would need new gaskets as I read that Hyundai uses paper ones? Does this only apply for the TB gasket?
  3. DIY: How to Seafoam the 3.8 V6

    Engine and Drivetrain
    forgive me if I may misread but this process cleans out the throttle body? Intake manifold etc correct? Would you recommend going in a wiping down the butterfly, TB walls etc ?
  4. Official Genesis Coupe Wheel Fitment Thread

    Wheels, Tires and Brakes 2008-2012
    Nice. Good to know! Thanks!!
  5. Official Genesis Coupe Wheel Fitment Thread

    Wheels, Tires and Brakes 2008-2012
    is there some poke ? looks like maybe an inch or two? or is it nice and flush>>?
  6. 19" Forgestar F14 Super Deep Concave - Gunmetal - 1800$ or OEM trade+cash

    Wheels & Tires
    Are you still needing oem + cash ? And could you pm me to discuss possible offers - I'll need shipping :sweat:
  7. Feeler: Forgestar F14 SD/SDC 19x9.5 +28 19x11+28

    Wheels & Tires
    still have em?
  8. 19" Forgestar F14 Super Deep Concave - Gunmetal - 1800$ or OEM trade+cash

    Wheels & Tires
    stil have them ?? let me know!!!!!
  9. Forgestar Super Deep Concave Officially Released!!!

    Wheels & Tires
    Forgestar f14 Hello! I would like to get a set of these bad boys! I want to run 19"s but I have no clue what a good flush fitment would be. Also Ill be on BC coils so if you have any recommendations please let me know.
  10. Official Genesis Coupe Wheel Fitment Thread

    Wheels, Tires and Brakes 2008-2012
    Scotty did you use spacers with this set up ??? looks epic.
  11. HID stock replacement

    Electrical & Wiring 2013 and up
    Are they just plug and play ?
  12. Megan Coilovers & BC Coilovers

    Suspension 2008-2012
    I looking to buy some used coils. Megan's. How would I know if the spring preload was tampered with? And if so how to return it to its stock setting? Cheers.
  13. Eibach Sportlich Springs

    Suspension
    Pm me shipped to 79904
  14. stolen genesis?

    General Discussion
    if one were to mimic the key fob, how would you protect your car from theft? recently 2 Gens have been stolen in the city I live in. wtf.
  15. New 2013 Front Lip [Polyurethane]

    Exterior 2013 and up
    ICED your too funny man. Yeah I love the feedback and advice on the mounts etc. Def going to get the lip and hit those Saronas you have. Looks clean. Need to drop mine on springs first to get the stance I want. Otherwise appreciate the hamster trails. Hard to say if I want to paint it silver...
  16. Injen SES or Magnaflow? 3.8

    3.8 V6 Discussion 2008-2012
    dude... injen ses. with depo test pipes. for the win. best value. best tips. best of luck shopping.
  17. 3.8 Exhaust: Injen or ARK?

    3.8 V6 Discussion 2008-2012
    Injen all the way. I just installed my injen with test pipes and couldn't be happier with the sound. It is a classy sound. not loud and raspy and high rpms. idling at alight its low (not low like magna) but low and aggressive. its a joy to listen to. WOT is music and a neck breaker. Besides it...
  18. DIY: 2013 3.8 Dual Catch Can Install

    Engine and Drivetrain
    So looking at he S1-OCC the single can to mount for the PCV side. S1 Oil Catch Can - do the hoses come with the purchase? ALso this can requires no servicing right? This should suffice as you guys have mentioned before. As for the placement Im planning on placing it just behind my intake...
  19. DIY: 2013 3.8 Dual Catch Can Install

    Engine and Drivetrain
    Finall, the catch cans from MICHI are only for the 2.0T they can be used for the 3.8 i assume? I also will take your advice and only install the PCVside.
  20. DIY: 2013 3.8 Dual Catch Can Install

    Engine and Drivetrain
    Hey Inertia, you seem like a guru on this catch can info. So from what Ive read we need the PCV catch can for the 3.8s. And having 2 is overkill?
1-20 of 117 Results
Top