Hyundai Genesis Forum banner

Search results

1-20 of 123 Results
Advanced Search
  1. Turbo manifold removal

    2.0T Discussion 2013 and up
    From what I remember I either used a 1/4" socket wrench because of its low profile from underneath the car, or I removed the downpipe and O2 housing and had easier access to it.
  2. Turbo manifold removal

    2.0T Discussion 2013 and up
    The two bolts where the turbo is actually attached to the manifold?
  3. P0365 Camshaft Position Sensor "B" Circuit

    2.0T Discussion 2013 and up
    Mine occured after a small bang which happened to be a few exhaust valves exploding and shredding cylinder walls 1 and 3. I bought an engine with 27K miles on it that came with an auto trans that I never used. It took me 3 days alone in my garage to do the engine replacement. I hope your issue...
  4. Any experience with Brian Crower?

    2.0T Discussion 2013 and up
    How much stronger are Brian Crower valves, springs, and retainers? Looking to build my head so it is stronger. It was a failure point in my last engine. Anyone have any experience using their valves, springs, and retainers?
  5. FOR SALE: Stock BK2 Turbo

    Purchasing and Orders
    I have a stock BK2 Turbo that has 27K miles. It's all packed up and ready to be shipped. Message me for further details. Can have it shipped out within an hour. Here is the turbo https://m.imgur.com/a/pnXtkq2
  6. Need help with turbo

    2.0T Discussion 2013 and up
    If you need end up needing another turbo, message me.
  7. 2.0T to a 3.8?

    2.0T Discussion 2013 and up
    My 2.0T blew with 44K miles on it. This was December of 2017. I got another 2.0T with 27K miles on it for $2800 that also came with an auto trans, and subframe but didn't need either because I re-used my manual trans. Took me 5 days by myself to do the swap and it was my very first time doing a...
  8. FOR SALE: Auto Trans

    Purchasing and Orders
    Automatic Transmission with 27k miles on it. Came out of a 2013 Genesis Coupe 2.0T. For more info and price click link. https://chicago.craigslist.org/wcl/pts/d/napervillegenesis-coupe-automatic/6787590764.html
  9. Is anyone running 400whp?

    2.0T Discussion 2013 and up
    Want my car to be 400whp and planning on using a Garrett 3076R. Is anyone running 400whp on stock internals and stock fuel? Not really worried if I'd have to upgrade fuel, but would rather not have to build up the head/block. I'm really just looking to hear what all of you have in your 400whp or...
  10. Blown engine question.

    General Discussion
    So I blew my 2014 2.0T engine on December 29 2017 and I just finished putting a new one in on July 16. Any ideas on how I can get money or what to do with the old engine that could make me some money?
  11. Flywheel bolts for Auto Trans

    2.0T Discussion 2013 and up
    I got them off with a 12 point 17mm I was accidentally putting an 18mm to it and was like what! It's not working! I derped lol thanks for the 12 point socket suggestion!
  12. Flywheel bolts for Auto Trans

    2.0T Discussion 2013 and up
    Still no luck with a 12 point, it just slips and going to strip it out. I need to find the correct socket for it but can't. I know someone here has taken this off and I really need to know what they used.
  13. Flywheel bolts for Auto Trans

    2.0T Discussion 2013 and up
    Wait my bad I have 6 point sockets, I'm a derp I'll give a 12 point a shot. I'll get back if it works thanks!
  14. Flywheel bolts for Auto Trans

    2.0T Discussion 2013 and up
    Ofcourse, it just slips instantly with barely any pressure.
  15. Flywheel bolts for Auto Trans

    2.0T Discussion 2013 and up
    https://imgur.com/a/0LLFOqP Here is a picture.
  16. Flywheel bolts for Auto Trans

    2.0T Discussion 2013 and up
    Currently putting in a new engine because mine blew (long story), and I took the auto trans off of the engine, the torque converter off the fly wheel, and now the fly wheel is just left but I can't figure out what type of socket goes on the bolts. I got an E20, E22, and E24 socket and none of...
  17. Radiator Removal.

    2.0T Discussion 2013 and up
    I figured it out, you can slide the radiator away from the A/C radiator. I thought they were connected.
  18. Radiator Removal.

    2.0T Discussion 2013 and up
    No I have a manual. They still seem to be attached to the drivers side of the radiator.
  19. Radiator Removal.

    2.0T Discussion 2013 and up
    So it seems that I have unbolted everything that needed to be unbolted and removed, including the bottom radiator hose, but can't seem to figure out how to remove/get past the metal A/C lines that seem to be attached to the right side of the radiator.
  20. Exhaust Sound. ISR Full Turbo Back Exhaust

    2.0T Discussion 2013 and up
    Hmmmmm, not quite sure what this buzzing is. Maybe a heat shield vibrating? I have the same catless and no muffler set up and it sounds awesome always. I don't get any buzzing.
1-20 of 123 Results
Top