Search Results for ‘2.0 turbo’

So I've recently had a problem where my Forge BOV was getting stuck open due to the vacuum pressure not bleading off. What i mean is when i would let of the throttle the bov would lift relieving the pressure but the vacuum that pulls the piston up wouldnt let out leaving the bov wide open. Is...

Hi guys I currently have a 2008 Hyundai Tiburon GT automatic transmission. In about a year or so I am looking to buy a genesis coupe I know I wanted to be a BK2 but I’m not sure if I want the 2.0 turbo or the V6. Any thoughts as to which would be a better transition from my current car? I want...

Good afternoon everyone, What’s your thoughts on letting a turbo charged engine cool down for 2-3 minutes before shutting the engine down? I was told by many to let it cool down for a few minutes before turning it off to help preserve the turbo life. I was also told that was more of a thing...

Hiii guys I bought my genesis over a year ago with 7900 miles on it So it’s pretty clean for clean build I think it’s had enough time being stock Now that i have more time i would like to turn it into a more enjoyable car I’ve heard that fbo e85 is a good setup until the stock turbo says bye...

Hello, so I purchased a turbo xs rfl bov from genracer and I first installed it straight into the solenoid everything was good no leaks and when I rev it up the bov wasn’t opening at all not even a little so then I went to doing a solenoid bypass and went straight to the intake manifold and...

What are people's experiences with this engine after 100k miles modded or not? My car is at 105k its been maintained well, im the second owner ive had it for 5k and ive had no problems so far even with a couple bolt ons and some hard driving and it shows no signs of having an issue really How...

I see a lot of people talking about bolt ons for the bk1 and I'm new ish to upgrading cars what are all the bolt ons/what are the best bolt ons to get for bk1 2.0t? Currently all I have is a catch can and bov

Fbo 2.0t e85 around 320whp What would be the next big step to gain more ponies Running a 16g arashi turbo

Hey y’all I noticed a sudden change in my 2010 2.0t. My startups are a bit rough and sometimes the display console where the radio is at glitches out and the clock resets. Now after cranking the car it runs perfectly fine with no issues. It takes the usually one crank to start up it nothing to...

8 days ago I purchased a 2010 coupe 2.0t with 24k miles and overall is in great shape cosmetically and in every way I can tell but I’ve noticed this knocking noise. Here’s a video, could anyone help diagnose?

I’m gonna do a complete coolant flush with distilled water in my Bk1 Turbo. I’m a bit all over the place when it comes to coolant flushes tho. I read through some of the forums that I should just get a pure concentration of coolant and pre mix it myself because I won’t be able to get all the...

Hey all! My daughter cooked her block on 2013 2.0T. I've got it out and completely disassembled, but I can't find another 2.0T block. Most places only ask for a year, make and model, but this block was used for years across at least three different manufacturers on a number of models...

So I’ve had my coupe for a year and a half now. Six months in my engine seized after running out of oil, no warning other than it being due for an oil change. Hyundai covered it and the dealership put in a fully rebuilt remand short block, and rebuilt the head. It started blowing smoke almost...

Gonna change my spark plugs soon but I just can’t find anywhere about what material type or even the size gap I need to adjust the spark plug for. Also I’ve read a lot about one step colder plugs and I’m not sure if that’s something I should avoid. My 2010 2.0T is bone stock other than an k&n...

was wondering about this hose does anyone know the part number or what this hose is ? Also does this hose normally have a pcv/ check valve inside? The old one I had did and this new one doesn’t. Thank you

I was wondering about this hose does anyone know the part number or what this hose is ? Also does this hose normally have a pcv/ check valve inside? The old one I had did and this new one doesn’t. Thank you

Saw GC tuner has light weight pulleys for the BK2 2.0T by RMX anyone use these and your thoughts on them

So I bought a 2013 Genesis coupe 2.0T and after just two months of owning it with 87k miles the whole engine seized up. Now I’m looking to replace the engine and I was hoping to get some information on where I would find one or if anyone know if it’s possible to repair the engine. I need...

Hi everyone, So my 2010 has an SFR 1.5 tune, catback/testpipe, air intake. I have Already discussed with Jay which led nowhere. I know the car limits boost until warm up, but mine takes excessively long. Literally 20 minutes of somewhat spirited driving after coolant has reached its operating...

on my 2010 Bk1 2.0t A/T I recently installed a hks blow off valve i followed a video and installed it with my buddy the way it shows is exactly what i did was i copied how the guy ran a tee from the intake manifold to the a hose that went to a reducer to the hose that connects to the blow off...