Hyundai Genesis Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 44 Results
  1. General Discussion
    Hello, like title says i need help with some mods. Here in argentina we have the bk2 genesis coupe 3.8 with the bk1 motor inside (mpi) , so my question is: ¿What intake will fit right? ¿What are the mods that are the same for both motors? Here is a pic of how it looks
  2. Interior Section
    Hey guys so I had to get a new door for my gc and got a bk2 door for my bk1 for paint matching and the wiring harness for the doors aren't the same so the keyless entry doesn't work.ive swapped out all other parts that are compatible but I see 2 differences in the harnesses so I think I just...
  3. 2.0T Discussion 2008-2012
    so basically I have a 2012 2.0t (bk1) and want to swap a bk2 turbo in it I know I would need parts like the intercooler and a bk2 cat/o2 housing and probably a bk2 ecu. also I know the bk2 uses an electric wastegate actuator would I need like a bk2 engine wiring harness to connect up the...
  4. General Discussion
    Hey all, I own a 2010 Genesis Coupe 2.0T and she is close to about as stock as can be. Currently at stock ride height and NEED to drop her. I also plan on buying a set of wheels to fill out the fenders a bit more. Any advice on what I should do? I’ve heard Eibach makes some great lowering...
  5. General Discussion
    Hey all, 2010 2.0t, AEM cold air intake, Forge BOV, SFR 1.5 tune. Running into a P2261 issue which comes and goes it seems like. Sometimes when i drive my car i only make up to 6 pounds of boost, other times it runs just fine and I run the usual 16 pounds of boost. I have been told that i should...
  6. General Discussion
    Hello has anyone or is anyone currently running a bk2 2.0 engine with a bk1 2.0 turbo charger? Is there any benefit from it other than getting a louder turbo spool?
  7. Engine 3.8 V6
    Ok so i have changed the clutch twice already. i have a 2012 genesis coupe. the fist time i changed was an upgrade to a stage 2 clutch, everything went fine. The second time that was a week ago, they company i bought the clutch kit from gave me a bk2 2014 genesis coupe clutch kit without me...
  8. Interior 2008-2012
    Need urgent help. Got rainstorms coming in the following weeks and is was a light rainy day last night and as I was about to leave for work I noticed a very small puddle of water on my weather mats in my car. Just as I thought I fixed the water leaking problem in the trunk now I have water...
  9. Engine 2.0T
    Hello, I have an unusual problem with my Genesis. Namely, it happens to me, not so often, but it happens that while driving, when I push the gas pedal to the floor I feel that the car has no power, I can't hear the turbo. But when I turn off the engine, start it up the turbo works. But when the...
  10. Engine
    Hello everyone!! I just brought a replacement engine for my bk1 2.0t and I bought it with oem wire harness and no turbo ( still have old engine and turbo I can pull stuff off of) I wanted to know if there was anything crucial I need to make this go smooth with the least amount of repercussions...
  11. 3.8 V6 Discussion 2008-2012
    I am having some trouble finding some parts I need to fix this issue I have been having. The car has a fault in the tcm/transmission control module, in which the reverse lights are not working. This has caused my car many problems, sometimes I can start my car right up and it will drive normally...
  12. General Discussion
    Hey y’all I noticed a sudden change in my 2010 2.0t. My startups are a bit rough and sometimes the display console where the radio is at glitches out and the clock resets. Now after cranking the car it runs perfectly fine with no issues. It takes the usually one crank to start up it nothing to...
  13. 3.8 V6 Discussion 2008-2012
    I have recently had a problem where my car is stuck in 3rd gear while in drive, it will not shift at all out of third gear. I recently scanned the code P0700 (Transmission Control System (MIL Request)) I'm looking to see if anyone else has had this same problem and what it could be.
  14. General Discussion
    I’m looking at stroking and boosting my 3.8, and doing full exhaust. Are there any issues I should look out for while attempting to get higher HP/Torque values? Already looking into building the trans, should I worry about other drivetrain components?
  15. General Discussion
    I’m gonna do a complete coolant flush with distilled water in my Bk1 Turbo. I’m a bit all over the place when it comes to coolant flushes tho. I read through some of the forums that I should just get a pure concentration of coolant and pre mix it myself because I won’t be able to get all the...
  16. General Discussion
    Planning on doing a transmission fluid change in my 2010 genesis 2.0t. My car sits at 125k miles I know the car states that it requires AFT Red 1 fluid. Does anyone know which brand of transmission fluid that I should use for my car that meets AFT red 1 specs. If someone can give me a link that...
  17. General Discussion
    Currently back from a deployment and looking for parts for my 2010 2.0t gen coupe. Literally looking for anything considering i just started my build. I’m located in the Miami area and am willing to pay for shipping or meet up. Specifically looking for aftermarket head/tail lights, splitters...
  18. General Discussion
    Just ordered a set of Denso TT spark plugs (part number 4704) and If anyone knows the gap size these spark plugs need to be at for a bk1 2.0t? Also add an what is the torque spec the plugs need to be tightened at ? Thanks for the help in advanced.
  19. 2.0T Discussion 2008-2012
    Hi, I have a Bk1 and I'm having some issues where the AC won't cool with my Haltech Platinum PnP plugged. If I plug the stock ECU the AC will cool as normal. What could this issue be? Do I need to change something in the map on the Air Con area? Thanks
  20. Engine 2.0T
    Gonna change my spark plugs soon but I just can’t find anywhere about what material type or even the size gap I need to adjust the spark plug for. Also I’ve read a lot about one step colder plugs and I’m not sure if that’s something I should avoid. My 2010 2.0T is bone stock other than an k&n...
1-20 of 44 Results
Top