Search Results for ‘diy’

Super newbie question but im looking to do a muffler delete, my genny is my daily so I don't want it to bother others but I also want a more aggressive sound than the stock sound. After doing some listening around I've settled on a muffler delete. So my question is, am I able to just remove the...

So I bought a 2016 ultimate a couple years back from an auction site. I received the car and then a few weeks later an updated title paper came in saying it had been deemed a title of destruction. Anyone know what/where I can go to get this fixed? I’ve been stuck in a loop ever since trying to...

This is my walkthrough of the doing the manual swap on the Genesis Coupe, works for both the first gen and second gen... there is some minor differences in parts and location wise. I did this on a 2013 Bk2 2.0 Push start Auto. Hopefully this helps out a lot of you guys who are currently thinking...

Hello friends, A while ago i stumbled upon videos of these high end cars with LED RPM light shifters in the steering wheel or dash board. I did more research and tried making one. It was a pain understanding everything to it but ultimately I got it down. Take a look! I did see a few products...

Alright, I've done some digging on this site and elsewhere and haven't come across much info on mufflers for custom CBE builds. I have a 2015 3.8 r-spec and to save money I am going to buy some exhaust tips and mufflers online and bring them to a shop to have the exhaust system re-piped from to...

I want to start off by first saying that I have not installed these yet but I am putting this up as a place-marker for myself so that I will actually make this DIY (and will update it accordingly as long as everything goes well) as well as the following disclaimer. Disclaimer: I'm not...

I tried looking around for an installation guide on n2mb wot box installation for a 2013 3.8 r spec. Does anyone have some information or know where to find and how to install please share. Thanks!

Guys. New to the forum here but maybe you can help me out. Somebody just gave me brand new 2005 G35 HKS exhaust. He sold the car before he installed it. MY question is do you think it worth the work (if even possible) to retrofit this on my 2010 3.8? I have a professional welder at my disposal...

So I've finally got my hands on a Valeo HD clutch and a 2013 flywheel for my 2010 2.0t. Now i just need to figure out what are the correct factory flywheel bolts for this setup. The dealership said there are 2 versions of flywheel bolts for the 2013. Then came the usual question of whats my...

Hello Guys, I've had issues with my 2010 3.8 Track Gen Coupe's Radio for a while where it shuts off all connections (bluetooth, CD, etc) and reboots itself randomly while driving. Then a couple of months ago, I had the car parked fora couple of weeks, while I used my other car and when I got...

Hi all, So I found a bunch of diff fluid when I swapped out my summer tires for my winter setup. Took it to the dealer and as I suspected, the pinion seal is bad and leaking diff fluid. They quoted me at $350 to get the seal replaced. Here's my question: should I pay the $350 to get the seal...

As of June 2015, I can't seem to find anything recent on this topic here... Going back up to 10 years, there are references to www.hyundaitechinfo.com which used to offer easy access to shop manuals. But today this doesn't work as it used to: the home page asks you to create an account, and when...

Hi, first let me say that this is my first DIY post and I hope it helps many GenCoupe users. When I was scouring the forums for this information, every search ends in a dead end. Plenty of people looking for information leading up to the actual removal of this trim piece but none that actually...

earlier in the week I spoke to my supplier about a sale on lights, well the supplier wants to offer an even greater deal for this weekend. follow the link and select one of the options that say "Black Friday" and you will be saving even more for this weekend. Again.. ONLY FOR THE BLACK FRIDAY...

Alright so I know this is probably going to be the most annoying way to start a new thread, but I have to do it anyway. Im new to this Forum. Im 17 years old (Implying that spending's are going to be tight as hell) and about 2 months ago I received a 2011, black, Hyundai Genesis coupe r-spec...

DIY :|: Rearview Camera w/ LCD Mirror Install Been a lurker for a while; thought it was time to give back to the GenCoupe community. Today, I'm going to walk you through perhaps the simplest & coolest mod since the tablet install. No GCs come with a rearview camera from factory. I'm a fan of...

2013 Genesis Coupe Front End DIY Grill Delete Tools required for the job: - Metric wrenches and sockets - 3-5 Microfiber towels - Flat/Phillips head screwdrivers (S/M/L) - 2 Large towels (protect bumper on hard floors) - 2-3 Bowls (to store parts) - Painters...

On Step 7 of the installation it details to install the elbow silicone hose (08504) onto the turbo inlet as shown and secure with the provided hose clamp. http://www.vividracing.com/catalog/productdocs/69-5302_inst.pdf When at this step, there is a stock piece on the turbo inlet that connects...

All right as I promised about a month ago here is the CNT V3 DIY, and review. First things first, I purchased this from Jomer (FBHYUNDAI) with Fred Beans parts here on the forum. He is great very helpful and will find you whatever you need. I’ll start with the DIY and finish up with my thoughts...

Hey guys got bored today decided to plasti-dip my rims. I'm sure most everyone is familiar with this product by now but here is my DIY on the 2013 wheels. Tools: 3-5 cans of Plasti-Dip rattle cans Rim cleaning materials (2-3 rags, rim cleaner/soap & water) Spray bottle Pure rubbing alcohol...