Hyundai Genesis Forum banner
flywheel

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 15 Results
  1. 2.0T Discussion 2013 and up
    Im swapping my clutch for stage 2 comp clutch kit with flywheel, i dropped the tranny and took off the oem pressure plate and clutch disk and then ran into my biggest issue... FLYWHEEL BOLTS UGH.. Ive tried everything to try and crank those things off, Impact Driver, Long Torque Wrench, regular...
  2. General Discussion
    So I recently just installed an act clutch kit with the act flywheel, my car flashes my CEL when i start to pass 3500 rpms then it surges due to misfires i guess and drops to zero but the car drives perfectly fine i just cant really step on the throttle or else it does that. I checked if i had...
  3. Drivetrain
    Well, Title says it all. I have a 2010 Genesis, I am pushing more power than stock and need a clutch set up that can handle about 315 HP. It is my daily driver and I do not want something that is going to damage my left leg (Hard clutch pedal) - Looking for something that feels close to stock...
  4. Drivetrain
    Hello everyone, I'm new to the forums, but have owned my '13 genesis for a couple years now. I bought it at 24,000 and it just recently reached 45,000 and I have been experiencing a lot of clutch slipping. Back in October of last year the dealership informed me that the clutch was worn and...
  5. 2.0T Discussion 2013 and up
    So I've finally got my hands on a Valeo HD clutch and a 2013 flywheel for my 2010 2.0t. Now i just need to figure out what are the correct factory flywheel bolts for this setup. The dealership said there are 2 versions of flywheel bolts for the 2013. Then came the usual question of whats my...
  6. Drivetrain
    So I just got an ACT clutch and Fidanza flywheel installed on my Genesis Coupe, and I've run into some issues. Here are my current symptoms: - Clutch grabs literally at the bottom of the pedal travel. The bite point before the new clutch was already really really low before (within the first...
  7. 2.0T Discussion 2008-2012
    The flywheel on the car (2008-2012) is 23200-2C010. And the flywheel for 2013+ is 23200-2C050. I have a 2010 genesis coupe 6MT and When I searched on Ebay, there is only 23200-2C050. Is this part also good for 2008-2012 gen coupe 2.0T? I am not sure, so I am asking anyone have the right...
  8. North East / New England
    So like so many on here, im trying to decide what to do with my slipping transmission. I cant decide if the chatter from a SMF is worth the headache or if i should just try and find a 2013 DMF instead. So if theres anyone out there who'd be willing to let me ride in their car for minute and...
  9. Vendor Drivetrain
    ░░▒▒▓▌Competition Clutch Stg 2 Clutch + Flywheel Kit for 2.0T ║ GenRacer The Competition Clutch Stg 2 Kit 2.0T 2010-2012 THE FAVORITE CLUTCH + FLYWHEEL KIT! Competition Clutch now offers a complete clutch and flywheel assembly for the 2010-2012 Hyundai Genesis Coupe 2.0T. The package...
  10. 2.0T Discussion 2008-2012
    hey guys I have a 2010 gen coup 2.0T. im hearing sucking/ rattle coming from the back side of the engine. it doesn't happen until im driving, I push the clutch and as the engine slows to idle it makes this almost sucking sound. I can hear It with the windows up.
  11. Vendor Drivetrain
    ░░▒▒▓▌IN STOCK! Competition Clutch Stage 2 for 2.0T ║ GenRacer [ IN CONJUNCTION WITH COMPETITION CLUTCH ] The Competition Clutch Stage 2 Kit for 2.0T FINALLY BACK IN STOCK This assembly provides an estimated 80% increase in torque capacity and is properly suited for aggressive street...
  12. Drivetrain
    I'm starting this thread to tap in to your guys experience and knowledge. There seems to be a lack of resources on this topic for 2013. I want to keep this thread on track with the after market side of things, i.e what's out there and what people are using. There are already lots of threads on...
  13. 2.0T Discussion 2008-2012
    I want to buy your OEM pilot bearing for my 2010 2.0t 6sp M/T or if a vendor offers a stand-alone brass pilot bushing replacement, please contact me via pm. If anyone out there still has their OEM pilot bearing from your DMF or your entire DMF lying around, please let me know as I need this...
  14. Drivetrain
    Hello All, I recently finished installing a BR stage 3 kit. Great stuff, 2 days after installing I notice my clutch or flywheel slips at 4000-4500 in 4-6 gears, progressively its now started to slip at the same rpm range in 3rd gear well. I've since stopped boosting it completely, and when...
1-14 of 15 Results
Top