Hyundai Genesis Forum banner
help
1-20 of 39 Results
  1. General Discussion
    Came across this on Aliexpress and I was wondering if any of you have this or would be willing to purchase, just have a general question I do not understand. Options for his Carplay Headunit are these. Listed as is • Quad 1g ram 16gb Rom • Octa 3g 32g carplay • Octa 4g 64g carplay • Octa 6g...
  2. Engine 3.8 V6
    So I got this today, just crusing around town and I do have test pipes installed but sure has nothing to do with this, anyone know which O2 sensor this is faulting? Which side and the one before or after the tipes?
  3. Electrical & Wiring 2013 and up
    I was Driving to go see my parents 3.8 R-spec and 2 min into the drive i goto turn on my A/c and got nothing cylced through some modes and all the sudden started to smell burning and saw smoking coming through my vents pulled over and the connector to my cooling fan was Melted. cant find the...
  4. Engine 2.0T
    Just tried swapping a buddy's canned tuned ECU into my car only to find that it would crank but not start. So, I put my original ECU back in but now the ESC and ABS lights are on permanently. Tried disconnecting the battery for 5 minutes and turning it back on, and tried doing the key dance as...
  5. Engine 2.0T
    Hey everyone, Pretty new to this platform and to messing with cars in general so not sure if this sound is an issue but I hear a rattling in my engine bay when idling. I can't localize the sound to any specific region. I haven't experienced any issues when driving or really pushing the car...
  6. Drivetrain
    Haven’t been able to find any topics on this or it’s hard to locate. So I joined to try and get some help if any possible or another link to a different post. Recently I have been having problems with my manual transmission. I don’t know if anyone has experience or knowledge about this problem...
  7. Interior Section
    So I have a OEM nav from the 2nd generation. The touch screen is off by a half inch or more depending. Trying to input an address is impossible. For example pressing 3 will activate 1, or pressing 9 might get a 7. Dont even get me started on trying to spell a word. I've seen a post saying to...
  8. Drivetrain
    The other day i was trying to take my drivers side rear wheel off when I snapped one of my lug studs. Must’ve been one of the techs at Discount Tire who air gunned my wheels back on smh. What I was wondering is if there is anyone out there who can shine some light on what I’ll need to be...
  9. General Discussion
    So I have a 2011 3.8. The transmission is jerking harder than it should be and squeaking going into 3rd and 4th gear. I’m assuming it’s a problem with low transmission fluid so I want to check the fluid level or have someone check it for me. Who should I take it to? Can I check it myself? What’s...
  10. GenCoupe Build / Projects
    Okay, I took a wrecked 2013 Coupe 2.0t and removed complete engine, 6spd Trans, ecu, and engine and body harness and swapped it into my bagged mazda b2200 lol. Engine and tranny went in smooth. Harness was not as fun but it's all in and wired up. Here's the deal... when I turn the key it will...
  11. New Member Section
    Hey guys, I’m new to the gen coupe world. Bought it (2011 2.0 base) over the summer 2020 to work on. Recently, I swapped my cracked stock tail lights with bk2 with the Audi mod. All was fine. I bought a cheap backup camera to take place of one of the tag lights. Well when I was pulling on the...
  12. Engine 2.0T
    Hello all !!! I'm fairly new to the Forums here but I'm looking for some help like many others. I have a 2014 2.0t automatic it's my baby im in love <3 got it with 33k miles !!! so far i have installed a forge BOV K&N Typhoon intake ISR street catback with downpipe and test pipe (second cat...
  13. General Discussion
    Alright my people I need some help here. I have had my BK1 2.0 for 2 years this June and I have finally reached the career that I wanted to do in my life and with all that being said I can finally pull the trigger on car mods that I have been wanting to and buy for my car for the past year and...
  14. 3.8 V6 Discussion 2013 and up
    Phil, PA - South Jersey here... I bought a 2013 Gen Coupe 3.8 GT autoshmatic with about 60k on it give or take 3k, I don't remember (it was 2 years ago). Anyways, I fell in love with it. I really like my car. A lot. And this is my 25th car in my mid-thirties. I've had all types of cars...
  15. Wheels, Tires and Brakes 2013 and up
    So i bought some new wheels ESR Sr01 and slapped them on but my front left wheel is scraping my coilover! So i got a quarter inch spacer and put it on but now my lug nuts keep stripping off... idk what to do should i get a thinner spacer or do i have to mess with that coilover. ps my coilovers...
  16. 2.0T Discussion 2008-2012
    Hello , so I’m getting a code saying “ too lean on idle bank 1.” And I’m amusing my manifold is leaking from what I’ve seen. Correct me if I’m wrong I heard the stock manifolds aren’t good either way so thinking of replacing it. Could y’all link me to manifolds that can fit my stock turbo and if...
  17. Wheels, Tires and Brakes 2008-2012
    Alright guys, so just got some ESR CS11s. 19x9.5 for the front and 19x10.5 for the rear. So my question is how much stretch should I do for tires. What are you guys running? I was thinking bout throwing on some low profile tires 255/30/19 in the front and 275/30/19 in the rear. Or am I way off...
  18. 2.0T Discussion 2008-2012
    * UPDATE * I removed my forge BOV cleaned it and re-greased it, car was acting great, the noise wasn't happening and everything was fine. Third day came along and it started doing that same noise again when the air is being sucked in but it sounds like a plastic bag is blocking when i...
  19. 2.0T Discussion 2008-2012
    i got these codes on my car.. low rps... it wont start i dont know how to fix cars and my local shop does not know what wrong with the car lol might be because they dont have an electrical guy.... i replaced some camshaft.. i recently got a new... control valve solenoid and the car still wont...
  20. Drivetrain
    Can anyone verify some part numbers for me? I’m looking at upgrading my 2010 2.0t clutch to the 2013+ BK2 clutch, and i am not sure if the part numbers are shared across both generations. The part numbers I have are 23200 2C050, 41100 25300, 41300 25300, 41421 38000 Here’s the lot on I found...
1-20 of 39 Results
Top