Search Results for ‘swap’

I've searched the forums and Googled before I made this post, so if I missed a known how-to write up which answers my question, please post a link. TL;DR: Is it possible to swap from BK1 console with auto climate control to BK1 console with manual climate control without losing functionality...

So long story short, threw a rod in my '13 genesis coupe 3.8 Track Auto, had a '13 genesis coupe 3.8 grand touring engine shipped to me because they're supposed to be the same thing. So now I'm halfway through the process and have the engine wiring harness from my track engine on the grand...

Hello everyone I recently tried to swap out my open diff for an LSD unit on my 2015 GC 3.8 MT. When trying to get the bolts off that hold the CV axels onto a flange on the diff they will not budge. I’m damn scared to strip the heads on them because they are a triple square inverted head. So… I’m...

I’ve been looking and I’m seeing some conflicting information about this and I also have a few questions specific to my situation. to note I’m at 100K miles. I have a 3.55 LSD and bought 3.91 open diff from an old 2.0T with ~40K miles, I originally planned on just swapping the ring out the...

Has anyone successfully done this swap, i'm neck deep into this swap and about to begin dropping the engine in this coming week. I am using the Sikky swap kit, I am wondering was a shifter extension needed for the tr6060? if so which one was used? Thanks for the help guys

This mad lad is swapping a Scatpack engine, trans and interior into a BK1 and I couldn’t be anymore excited lol Channel: Street Fab Performance https://youtube.com/c/StreetFabPerformance

Okay i need some advise. I have a 2015 Rspec Coupe 3.8L that has a faulty engine n’ wont run. Dont want to sell the car after i already put suspension, exhaust, interior stuff ect.. anyways my question is, is there any similar/compatible engines that are reliable enough to fit as a swap? Dont...

Hey guys, I have an automatic 2013 bk2 2.0t that got engine swapped with a 2012 bk1 engine. When the engines get swapped are they supposed to get some kind of tune or reprogramming? I’m curious because a little while after the swap, my car started to jerk itself when it reaches 20 and 35 miles...

Its been almost 2 weeks now since i posted this up, waiting for the admin to approve my post for this to be in the drivetrain section... for now ima put this up in general discussion. This is my walkthrough of the doing the manual swap on the Genesis Coupe, works for both the first gen and...

This is my walkthrough of the doing the manual swap on the Genesis Coupe, works for both the first gen and second gen... there is some minor differences in parts and location wise. I did this on a 2013 Bk2 2.0 Push start Auto. Hopefully this helps out a lot of you guys who are currently thinking...

I have a 2013 genesis coupe 3.8 and I blew my engine so now’s my opportunity for an engine swap , not sure what better engine I can put in my car . Was thinking about the q50 3.0L twin turbo Or a 2jz engine I’m open to any suggestions I love my genesis and want to see it hitting atleast 450whp I...

Hello all, I have a M/T 2012 3.8 Track that i totaled in the rear. Transmission, engine and interior are working and are in perfect condition. I recently picked up a 2010 3.8 A/T body to move the engine, transmission, and interior in to. It was parted out before i got it so most of the interior...

I Have a 2012 2.0T 6 speed. Runs drives but needs bunch of bodywork. I found a really nice 2010 3.8l gt 6 speed with a siezed motor. Im trying to weigh out my options. My question is will a 2.0t engine swap into a 3.8gt car fairly easily or is this something to avoid all together?

//

//

My 2013 2.0T Rspec manual recently just got totalled and I was wondering if I could swap the LSD diff from that into a base model genesis without any problems? If so what parts and what would I have to do and get to do it?

Hi all, New to the forum. I have a 2010 Coupe 2.0T with a manual transmission and a blown engine. I found a replacement engine in another complete 2010 2.0T but it has an auto transmission. I was told by a user parts dealer that the engine mated to an auto transmission is different to the engine...

So I've finally got my hands on a Valeo HD clutch and a 2013 flywheel for my 2010 2.0t. Now i just need to figure out what are the correct factory flywheel bolts for this setup. The dealership said there are 2 versions of flywheel bolts for the 2013. Then came the usual question of whats my...

Hey everyone, just made an account to get some questions answered about a small project I'm gonna be taking on. Long story short; I own a 2010 3.8 Gen MT. The car was totalled without insurance, so I'm basically on my own to salvage what I can. I figured my easiest solution, besides taking on a...

I just wanted to share some lessons I learned from the 16g turbo swap I did this week that I wasn't able to find definitive information in any threads. Those that already swapped their turbos can sympathize :) - The manifold studs are a PITA (but you knew that). Some bad machining happened and...