DIY: Spark Plug Install - One Step Colder
Join the discussion
Recommended Reading
-
DIY: P2261 ECU error / CEL Fix (2010-2012)
Engine and DrivetrainHi All, I was having the " P2261 - Turbocharger/Supercharger Bypass Valve - Mechanical " ecu error code you get when switching to an aftermarket BOV and running line directly to IM, however mine never through a CEL. But I have found the problem why it was causing this and have found a fix for...- 74
- 56K
-
D!RTYLOUD · updated
-
DIY - Muffler Delete w/ Harbor Freight Welder and no Experience
Engine and DrivetrainYes, you read the title correctly. I did my own muffler delete with a Harbor Freight flux welder and zero welding experience. I have a 2013 3.8 Track. Long story short, the muffler shop here wanted over $600.00 to do it. That seemed way too high considering there are only two bolts holding on...- 2
- 371
-
DIY Timing Chain Change
Engine and DrivetrainFirst post and imagine it is a big one for the first. Last weekend I had some trouble with the coupe. I went to work and let it sit all day, and right now in north Alabama it is quite cold outside. I went to start it up and it took much longer than normal, drove home, about 3 miles, and...- 23
- 7K
-
DIY - N2MB WOT Box Install
Engine and DrivetrainDisclaimer: As always, I hold no responsibility for damage to your vehicle or injury to your person while attempting this modification. I give this a 2 out of 5 difficulty with the only hard part being having enough balls to splice into your OEM wiring harness. The ability to properly solder &...- 80
- 48K
-
Tufast · updated
-
Oil catch can install 2014 2.0t
Engine and DrivetrainHi guys I’m new here I’m considering with everything I’ve been reading on catch cans to install one. I was just wondering what’s the best way of doing so I want to do it on the turbo side I know to run the breather tube to the catch can but do I run another tube from intake to the catch can too?- 11
- 417
Join now to ask and comment!