Hyundai Genesis Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
11 Posts
Discussion Starter · #1 · (Edited)
Hello all.
OK I need a cram course on what to put on the garage floor of a new house. the cement will be about 4-5 months old if that matters, and it will be in Florida.

The homebuilder says the epoxy floor is $3.50 Sq. Ft.. I don't know the process, but it has that confetti stuff on the tops. Since the garage is about 32 x 26 feet, the estimate is more than $2800 !!!

I don't have a budget for that. If I do this myself, is this a multiple-layer coating? How long does it take to dry, and does it really stink quartz flooring washington dc? I don't want to breathe that stuff for a week. Also, my wife has asthma and couldn't handle the fumes.

I don't know what I'm talking about....if you can't tell hahaha hahaha
 

· Registered
Joined
·
11 Posts
Discussion Starter · #2 ·
Hello all.
OK I need a cram course on what to put on the garage floor of a new house. the cement will be about 4-5 months old if that matters, and it will be in Florida.

The homebuilder says the epoxy floor is $3.50 Sq. Ft.. I don't know the process, but it has that confetti stuff on the tops. Since the garage is about 32 x 26 feet, the estimate is more than $2800 !!!

I don't have a budget for that. If I do this myself, is this a multiple-layer coating? How long does it take to dry, and does it really stink with epoxy flooring phoenix? I don't want to breathe that stuff for a week. Also, my wife has asthma and couldn't handle the fumes.

I don't know what I'm talking about....if you can't tell hahaha hahaha
thanks in advance for any help
 

· Registered
Joined
·
1 Posts
Having a professional install an epoxy floor over the existing slab in your garage typically costs between $3 and $12 per square foot. A one-car garage is usually about 250 square feet and can cost between $750 to $3,000, depending on the type of coating.
 

· I'd rather do it myself
Joined
·
20,501 Posts
There are three kinds, real two part epoxy, most durable and expensive probably have someone to install.

The other two are more user friendly. One oil based, noxious fumes when curing, not as durable as the true epoxy. Then water based. No bad smells but the least durable of the bunch.

All epoxies have a limited use time once starting so there you go. real is shortest to water is longest. The color flakes get put on top after the epoxy is in place.
 

· Registered
Joined
·
38 Posts
I've installed two-part epoxy coatings a couple of time without issues. If you're doing a two-car garage do it in sections and only mix enough to do that section at a time. Also, do it when it's cool. the warmer the weather the faster it will cure.
 

· Registered
Joined
·
11 Posts
Discussion Starter · #6 ·
There are three kinds, real two part epoxy, most durable and expensive probably have someone to install.

The other two are more user friendly. One oil based, noxious fumes when curing, not as durable as the true epoxy. Then water based. No bad smells but the least durable of the bunch.

All epoxies have a limited use time once starting so there you go. real is shortest to water is longest. The color flakes get put on top after the epoxy is in place.


epoxy flooring boston
thank you so much for your suggestion
 

· Premium Member
Joined
·
16,590 Posts
Just like with ANY paint... PREP PREP PREP

You really want to leech out any oil that may have soaked into the concrete before apply the coating.
Otherwise 6 months to a year down the road, you'll see bubbling, where the epoxy hasn't adhere/soaked into the concrete because of the oil.

If you see where an oil spot "was" then it's not clean enough.
Also if it's been seal coated, you'll want to remove that also.

It just need to be clean enough to allow the epoxy to soak into the concrete a few mm.
 

· Registered
Joined
·
11 Posts
Discussion Starter · #8 ·
Just like with ANY paint... PREP PREP PREP

You really want to leech out any oil that may have soaked into the concrete before apply the coating.
Otherwise 6 months to a year down the road, you'll see bubbling, where the epoxy hasn't adhere/soaked into the concrete because of the oil.

If you see where an oil spot "was" then it's not clean enough.
Also if it's been seal coated, you'll want to remove that also.
epoxy flooring arkansas
It just need to be clean enough to allow the epoxy to soak into the concrete a few mm.
thank you so much for your help
 
1 - 8 of 8 Posts
Top