Hyundai Genesis Forum banner
1 - 1 of 1 Posts

·
Mature Speeder
Joined
·
717 Posts
Just wanted to let everyone know that I did this set up but added two wires about 4' long. I poked a hole in the rubber dust cover the hood release cable goes through the fire wall and passed both wires through with a lubed coat hanger taped to the wires. The rubber grommet is just above the dead pedal. Under the hood I connected one wire to a ground lug and the other wire goes to the relay terminal you were previously connecting to ground. The switch is now in the ground path.
On the lower dash I drilled a hole for a switch I already had. I crimped two female terminals to the wires under the dash and connected to the switch. You can tell I messed up during the drilling and scratched the dash but I'll buff that out later.

Now I can turn on the LED's any time I want as long as the ignition is on.

 
1 - 1 of 1 Posts
Top