Hyundai Genesis Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
My front (left AND right) turn signals lights are constantly burning out... I must have replaced the bulbs 20 times each! Now they dont work at all... The side mirror and rear still work fine. Is there a recall in works for this problem? Thanks for any help anyone can provide...
 

· Registered
2013 3.8 Track 8 Speed
Joined
·
634 Posts
Ate you getting moisture inside the turn signal bezel? You can try buying replacement ends for the wire harness that plugs into the turn signal. They are like 10 bucks or less/pair at autozone.
Haven't seen any recalls.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Doesn't seem like any moisture is getting in... I was considering changing the bulb socket, but it may prove to be pretty laborous given the space to work with and how short the wires are going to the socket...
 

· Registered
2013 3.8 Track 8 Speed
Joined
·
634 Posts
Def a pain. Hyundai didnt think that one through. Try to find someone with a gen coupe near you. I met a few off here that was either in Maryland or really close by in DE,PA and VA. We helped work on a few cars that needed some help, as well as hung out and chilled.
Typically, as I'm sure you know when a bulb keeps burning out its bad wiring or bad grounds that spark out the bulb. The fact that both yours keep doing it is crazy.
You are using regular bulbs? Not LED or High definition replacements? I will do some research and see if I can at least give tou a few things to check.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
Using regular bulbs, not using LED... I alternate beween using the 1157A and the 2057A bulbs... Its definitely a pain! I'm sure it has to be wiring on both sides and/or the sockets or both... Thats why I was curious if a recall was in the works... At one point, I could get the drivers side to work by wiggling the bulb in the socket, but now that doesn't even work...
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top