Yes thanks again for anyone that can help me understand this!

 

Hey Guys I have the Factory Halogen Model of 2013 Hyundai Genesis Coupe 2.0T


I bought these headlights. https://www.protuninglab.com/02-az-yg13-2d-pbc-p-a.html?utm_source=googlepepla&utm_medium=adwords&id=140846687338&gclid=CjwKCAiAjNjgBRAgEiwAGLlf2nDdwR3jl1VGAFmSEDvbTjBVIIDcLn_7fV2wm2_hYY06Dd_ck2KSYhoCCqEQAvD_BwE

There is a lot of wiring i can see that i am missing. Has anyone done this before. And what would I have to do. I bought the D1S Bulbs that go into the CG lights. but from my current vehicle i only have one wiring harness and that one only plugs into the slot that controls the LED bar / HighBeams. so i have no lowbeams and nothing to wire them into? can someone help me with this puzzle. Ive been stuck on this project for 6months.

can reach me at TrevaaBrown@gmail.com with any information would be greatly appreciated could even pass u some compensation for your time and help.

 

Why not just install a DRL harness and be done with it instead of splicing your stock wiring?

 

You bridge the hot wire and the ground wire with the resistor. Do not cut the wire... splice into it.

 

So if I wanted to stop hyperblink with a resistor on the turn signal, would I splice the resistor onto the brown wire wholly? Somewhere else said to tap from Brown to ground, but that would skip the circuit right? Help soon please, car out of commission until I stop the hyperblink

 

Thank you!!!!

Sent from AutoGuide.com Free App

 

Cant see the picture you posted @FlyRyde. Can you try reposting the pic?

 

Please check post #43 of this thread...:icon_rolleyes:

 

Thank You!

 

THANK YOU, cowcow!!

 

Awesome, thanks!

 

Is there a way to disable the highbeam drl?

 

so much help

 

Sent from AutoGuide.com App

 

So if I want to add a LED strip as my DRL, I splice into the black and white wire and into a black wire for ground right?

 

Repost?? Please


Sent from AutoGuide.com App

 

:ttiwwp:

So if we could get that diagram...

 

Bad Link

Please repost a good link! Thanks!!

 

No image available but i'd really like to see this!!

 

Does anyone still have this picture?

 

Can anyone repost this pic? The links are bad.

 

Yes, repost PLEASE. Link is dead.

 

damn ... good job

 

Where is the diagram?

 

Just needed to cut into some wires in my headlight to tap into, thought this would help other. I have a 2010 genesis coupe 2.0, the orange wire in the drivers side light is the parking lights (orange lights in corner of headlights) I hope this helps someone!

 

Nooooooooo!!!! is the picture gone?

Neve rmind it came back

 

Is there a fuse on the other end of the low beam wiring? My driver side low beam stop working... Its not the bulb coz I pluggef the whole dside on the passenger side connector and it works....thanks

 

Fuse panel in the engine bay, by the driver side head. Open it, and read under the cover for the location of the headlight fuses. Each head light has its own fuse. If i remeber right, stand in front of the car, looking towards the rear, the 2 fuses are at the back on the right side. Think they were 15amp fuses. Both blue. If you cant find it, ill take a pic for ya. Hope that helps

 

Do it!!!

sent via DroidX